Tag - damper

Unique Application with Odd Flange Dampers!

Odd Flange Dampers for unique applications where the bolting patterns are completely different! Our customer had a unique application with some spacing and mounting challenges. We customized one of our 2300 series dampers to match their existing flange patterns with one unique pattern that bolts directly to their machinery while the opposite side bolts to exhaust ductwork! We also redesigned the bracketry to fit into the existing space. These are just a few of the customization Elite Industrial Controls can...

October 20, 2023Read more...

Refurbished 66″ x 66″ Multi-Louver Damper

It's Closing Time for this Refurbished 66" x 66" Multi-Louver Damper! This Shan-Rod damper was installed in 2004, and after almost 20 years of hard use, it needed some love. We stripped it down and refurbished it to provide at least another 20 years of worry-free service. This is just one of many services we provide at Elite Industrial Controls!

Before Repairing

October 13, 2023Read more...

Massive Ø120” Blast Furnace Damper in Action!

Check out the video of this Massive Ø120” Blast Furnace Damper in action! We recently repaired a customers Ø120" 2400 series damper that is currently installed in a blast furnace system of a major steel manufacturer. Elite can create new and repaired solutions from any size from Ø2" dampers to well over Ø120" in diameter. Key Features: ✅ Impressive Ø120" Size ✅ Precision Hydraulic Controls ✅ Durability to Withstand Extreme Conditions ✅ Improved Efficiency for the Blast Furnace Performance

September 29, 2023Read more...
Ø12" 2120-8-S Damper

Product In Review: 2100 Series Ductwork Drilled (Medium Duty)

The 2100 series is used for all light & medium duty services by bolting into either existing or new lines with standard “Ductwork Drill” flanges. Various flange sizes available with standard or custom bolt circle patterns. If new construction, companion flanges can be provided upon request. Standard face to face dimension is 6” but custom face to face dimensions can be offered to fit your specific application. Our 2100 series is the standard for your application. Larger sizes than Ø48″...

June 30, 2021Read more...
Ø8" 2570-6 Damper

Product In Review: 2000 Series ANSI Class Wafer

The 2000 series butterfly flange less control valve can be used in either throttling or on/off of varies applications. The valve body is constructed of carbon steel, stainless steel, aluminum or special alloy with fabricated brackets and stuffing boxes welded to the body. The valve is constructed to bolt between two adjacent flanges on the duct/pipe. The standard valve design is to bolt between ANSI/ASME B16.1 Class 125 flanges. Sizes 24” and smaller also match ANSI/ASME B16.5 Class 150. For...

June 24, 2021Read more...
Ø1537mm 2423-7-8-9 Damper

Elite’s Specialty Refractory Valve

Elite Industrial Controls offers high temperature valve and damper designs to fit our customers wide range of applications. One of our Elite specialty valve types are our refractory lined dampers. Below are examples of various sized reduced refractory lined 2400 series dampers including a 1537mm (Ø60-1/2") reduced to 1337mm (Ø52-5/8") to a smaller 1150mm (45-1/4") reduced to 950mm (37-13/32") custom 2423-7-8-9 damper. Their application was for flue gas operating temperature of 871°C (1600°F) to maximum temperature of 1000°C (1832°F) at...

July 13, 2020Read more...
Ø84" 2723-6 Damper

Standard and Custom Fabricated Dampers

Elite Industrial Controls designs and manufactures various sized dampers & valves for a wide range of applications. Product mix varies from Ø2″ wafer valves to Ø120″ dampers. Here is an example of an Ø84” damper we designed and manufactured for one of our top tier customers at a steel plant. Their application required a unique mechanical stop that would open the valve fully 100% and close to 40%. Our final assembly department was able to adjust the...

February 26, 2020Read more...